您的位置:知识库 » .NET技术

在 Linux 操作系统中运行 ASP.NET 4 (下)

作者: 银河  来源: 博客园  发布时间: 2011-01-07 10:01  阅读: 2980 次  推荐: 1   原文链接   [收藏]  
摘要:我们之前已经讨论过在openSUSE 11.3 操作系统配置ASP.NET 4开发环境的问题了,下面将更详细的介绍后续步骤。

  “在 Linux 操作系统中运行 ASP.NET 4 (中)”中已经配置好了 openSUSE 11.3 操作系统。

  现在,我们进入“GNOME 终端”,使用 ifconfig 命令验证一下本虚拟的 IP 地址就是一开始我们在宽带路由器中为它分配的静态地址。

ben@linux-nyhn:~> /sbin/ifconfig
eth0 Link encap:Ethernet HWaddr
08:00:27:51:5B:0B
inet addr:
192.168.1.251 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe51:5b0b
/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:
1500 Metric:1
RX packets:
853 errors:0 dropped:0 overruns:0 frame:0
TX packets:
807 errors:0 dropped:0 overruns:0 carrier:0
collisions:
0 txqueuelen:1000
RX bytes:
853227 (833.2 Kb) TX bytes:90376 (88.2 Kb)

lo Link encap:Local Loopback
inet addr:
127.0.0.1 Mask:255.0.0.0
inet6 addr: ::
1/128 Scope:Host
UP LOOPBACK RUNNING MTU:
16436 Metric:1
RX packets:
22 errors:0 dropped:0 overruns:0 frame:0
TX packets:
22 errors:0 dropped:0 overruns:0 carrier:0
collisions:
0 txqueuelen:0
RX bytes:
1300 (1.2 Kb) TX bytes:1300 (1.2 Kb)

ben@linux
-nyhn:~> sudo vim /etc/hosts

  如上所示,再使用 vim 编辑器编辑 /etc/hosts 文件,增加一个域名 ben.skyiv.com,如下图所示:

  注意上图中的 IP 地址必须是 127.0.0.1,而不能是 192.168.1.251。在宿主机的 Windows Vista 操作系统中以管理员身份进入命令提示符,使用记事本编辑 C:\Windows\System32\drivers\etc\hosts 文件,增加一个同样的域名 ben.skyiv.com,注意此时 IP 地址必须是 192.168.1.251,而不能是 127.0.0.1,如下图所示:

  我们的 openSUSE 11.3 操作系统已经安装好了 apache 软件,但尚未启用,如下所示:

ben@linux-nyhn:~> sudo /sbin/service apache2 status
Checking
for httpd2: unused

  那么,现在,让我们设置 apache 为开机随系统启动,并且现在就启动它吧:

ben@linux-nyhn:~> sudo /sbin/chkconfig -add apache2
apache2
0:off 1:off 2:off 3:on 4:off 5:on 6:off
ben@linux
-nyhn:~> sudo /sbin/service apache2 start
Starting httpd2 (prefork) done
ben@linux
-nyhn:~> sudo /sbin/service apache2 status
Checking
for httpd2: running

  现在让我们在宿主机的 Windows Vista 操作系统的谷歌浏览器中打开 ben.skyiv.com 网站试试看吧:

  如上图所示,我们的 Apache 2.2.15 已经正常工作在 Linux/SUSE 操作系统上了。只不过现在该网站还没有内容而已。

  在 openSUSE 操作系统中,Apache 的默认文档是放在 /srv/www/htdocs 目录下的。

  openSUSE 操作系统已经为每个用户建立了 public_html 目录,例如我的用户就是 /home/ben/public_html 目录,用以放置该用户的网站的内容。可以通过 ben.skyiv.com/~ben 访问,这里 ben 是我的用户名,如下图所示:

  从上图中可以看出,这个目录是空的,需要用户自己放里放东东。那么,我们就编写如下一个 index.html 吧:

ben@linux-nyhn:~> cd public_html
ben@linux
-nyhn:~/public_html> vim index.html

  再次在 Windows Vista 操作系统中访问 ben.skyiv.com/~ben 网页:

  现在让我们来看看 mono 的版本:

ben@linux-nyhn:~> mono --version
Mono JIT compiler version
2.6.4 (tarball Mon Jul 5 13:53:45 UTC 2010)
Copyright (C)
2002-2010 Novell, Inc and Contributors. www.mono-project.com
TLS: __thread
GC: Included Boehm (with typed GC and Parallel Mark)
SIGSEGV: altstack
Notifications: epoll
Architecture: amd64
Disabled: none
ben@linux
-nyhn:~>
ben@linux
-nyhn:~> gmcs --version
Mono C# compiler version
2.6.4.0

  这个 mono 2.6.4 的版本太低了。根据 mono 官方下载页面的指示,按如下步骤进行升级:

ben@linux-nyhn:~> sudo zypper addrepo http://ftp.novell.com/pub/mono/download-stable/openSUSE_11.3 mono-stable
正在添加安装源 'mono-stable' [done]
Repository
'mono-stable' successfully added
Enabled: Yes
Autorefresh: No
URI: http:
//ftp.novell.com/pub/mono/download-stable/openSUSE_11.3

ben@linux
-nyhn:~> sudo zypper refresh --repo mono-stable
Retrieving repository
'mono-stable' metadata [done]
正在构建
'mono-stable' 安装源缓存 [done]
Specified repositories have been refreshed.
ben@linux
-nyhn:~> zypper dist-upgrade --repo mono-stable
=================> 在这里进行漫长的升级 <=================
ben@linux
-nyhn:~>

  升级完成,再次查看 mono 的版本:

  果然已经升级到最新的 mono 2.8.1 版本了。

ben@linux-nyhn:~> mono --version
Mono JIT compiler version
2.8.1 (tarball Fri Nov 12 14:37:21 UTC 2010)
Copyright (C)
2002-2010 Novell, Inc and Contributors. www.mono-project.com
TLS: __thread
SIGSEGV: altstack
Notifications: epoll
Architecture: amd64
Disabled: none
Misc: debugger softdebug
LLVM: yes(
2.8svn-mono)
GC: Included Boehm (with typed GC and Parallel Mark)
ben@linux
-nyhn:~> dmcs --version
Mono C# compiler version
2.8.1.0

  在 Apache mod_mono configuration tool 网页可以生成运行 ASP.NET 所需要的 Apache 软件的配置文件,如下图所示:

  生成的 ben.skyiv.com.conf 文件如下所示:

<virtualhost *:80>
ServerName ben.skyiv.com
DocumentRoot
/home/ben/www
# MonoServerPath can be changed to specify which version of ASP.NET
is hosted
# mod
-mono-server1 = ASP.NET 1.1 / mod-mono-server2 = ASP.NET 2.0
# For SUSE Linux Enterprise Mono Extension, uncomment the line below:
# MonoServerPath ben.skyiv.com
"/opt/novell/mono/bin/mod-mono-server2"
# For Mono on openSUSE, uncomment the line below instead:
MonoServerPath ben.skyiv.com
"/usr/bin/mod-mono-server2"

# To obtain line numbers
in stack traces you need to do two things:
#
1) Enable Debug code generation in your page by using the Debug="true"
# page directive, or by setting
in the
# application
's Web.config
# 2) Uncomment the MonoDebug true directive below to enable mod_mono debugging
MonoDebug ben.skyiv.com
true

# The MONO_IOMAP environment variable can be configured to provide platform abstraction
#
for file access in Linux. Valid values for MONO_IOMAP are:
#
case
# drive
# all
# Uncomment the line below to alter file access behavior
for the configured application
MonoSetEnv ben.skyiv.com MONO_IOMAP
=all
#
# Additional environtment variables can be
set for this server instance using
# the MonoSetEnv directive. MonoSetEnv takes a
string of 'name=value' pairs
# separated by semicolons. For instance, to enable platform abstraction
*and*
# use Mono
's old regular expression interpreter (which is slower, but has a
# shorter setup time), uncomment the line below instead:
# MonoSetEnv ben.skyiv.com MONO_IOMAP
=all;MONO_OLD_RX=1

MonoApplications ben.skyiv.com
"/:/home/ben/www"
<location "/">
Allow from all
Order allow,deny
MonoSetServerAlias ben.skyiv.com
SetHandler mono
SetOutputFilter DEFLATE
SetEnvIfNoCase Request_URI
"\.(?:gif|jpe?g|png)$" no-gzip dont-vary
</location>
<ifmodule mod_deflate.c>
AddOutputFilterByType DEFLATE text
/html text/plain text/xml text/javascript
</ifmodule>
</virtualhost>

  这个 ben.skyiv.com.conf 文件需要放在 /etc/apache2/conf.d 目录下:

ben@ben:~> ll /etc/apache2/conf.d
总计
8
-rw-r--r-- 1 ben users 2037 01-04 01:21 ben.skyiv.com.conf
-rw-r--r-- 1 root root 1239 10-01 02:12 mod_mono.conf

  然后创建 /home/ben/www 目录,并重启 Apache 服务:

ben@ben:~> mkdir www
ben@ben:
~> sudo /etc/init.d/apache2 restart
Syntax OK
Shutting down httpd2 (waiting
for all children to terminate) done
Starting httpd2 (prefork) done
ben@ben:
~>

  现在让我们建立一个网站:

ben@ben:~> cd www
ben@ben:
~/www> vim index.html

  在 openSUSE 11.3 操作系统中访问 ben.skyiv.com 网站,如下图所示:

  点击上图中的“服务器信息”,出现“The resource cannot be found”错误:

  这是预料之中的,因为我们还没有编写 info.aspx 文件呢。从上图中可以看出,ASP.NET 是 2.0 版的。

  现在,我们修改 /etc/apache2/conf.d/ben.skyiv.com.conf 文件,如下所示:

ben@ben:~/www> sudo vim /etc/apache2/conf.d/ben.skyiv.com.conf

  如上图所示,将 mod-mono-server2 改为 mod-mono-server4 。然后重启 Apache 服务:

ben@ben:~> sudo /etc/init.d/apache2 restart
Syntax OK
Shutting down httpd2 (waiting
for all children to terminate) done
Starting httpd2 (prefork) done
ben@ben:
~>

  然后重新访问 ben.skyiv.com/aspx/info.aspx 网页:

  从上图中可以看出,已经运行在 ASP.NET 4 了。

  现在,让我们来编写 info.aspx 程序吧:

ben@linux-nyhn:~/www> mkdir aspx src bin
ben@linux
-nyhn:~/www> vim aspx/info.aspx
ben@linux
-nyhn:~/www> vim src/info.aspx.cs
ben@linux
-nyhn:~/www> vim src/info.rsp

  网页文件 aspx/info.aspx 的内容如下所示:

01: <%@ Page Language="C#" inherits="Skyiv.Ben.Web.InfoPage" %>
02:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
03:
<html xmlns="http://www.w3.org/1999/xhtml" >
04:
<head runat="server">
05:
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
06:
<title>服务器信息</title>
07:
</head>
08:
<body>
09:
<form id="form1" runat="server">
10:
<a href="http://ben.skyiv.com">返回</a>
11:
<hr />
12:
<asp:GridView id="dgMain" runat="Server" >
13:
<AlternatingRowStyle BackColor="#FFFFCD" />
14:
<HeaderStyle BackColor="#AAAADD" />
15:
</asp:GridView>
16:
</form>
17:
</body>
18:
</html>

  对应的 C# 源程序 src/info.aspx.cs 的内容如下所示:

01: using System;
02: using System.Data;
03: using System.Web.UI;
04: using System.Web.UI.WebControls;
05:
06: namespace Skyiv.Ben.Web
07: {
08: public class InfoPage : Page
09: {
10: protected GridView dgMain;
11:
12: public void Page_Load(object sender, EventArgs e)
13: {
14: if (IsPostBack) return;
15: dgMain.DataSource = GetInfo();
16: dgMain.DataBind();
17: }
18:
19: DataTable GetInfo()
20: {
21: DataTable dt = new DataTable();
22: dt.Columns.Add("项目", typeof(string));
23: dt.Columns.Add("内容", typeof(string));
24: AddRow(dt, "操作系统", Environment.OSVersion);
25: AddRow(dt, "公共语言运行库", Environment.Version);
26: return dt;
27: }
28:
29: void AddRow(DataTable dt, string name, object value)
30: {
31: DataRow dr = dt.NewRow();
32: dr[0] = name;
33: dr[1] = value.ToString();
34: dt.Rows.Add(dr);
35: }
36: }
37: }

  编译响应文件 src/info.rsp 的内容如下所示:

-out:../bin/info.dll
-t:library
-r:System.Data
-r:System.Web
info.aspx.cs

  然后就是使用以下命令进行编译了:

ben@linux-nyhn:~/www> cd src
ben@linux
-nyhn:~/www/src> dmcs @info.rsp

  编译完成,网站的运行效果如下图所示:

  至此,我们成功地在 Linux 操作系统中运行 ASP.NET 4。

  相关文章:在 Linux 操作系统中运行 ASP.NET 4(上)

                     在 Linux 操作系统中运行 ASP.NET 4 (中)

1
0
 

.NET技术热门文章

    .NET技术最新文章

      最新新闻

        热门新闻